Zytel FR15

Excel Plastic Products

Plastic Sheets, Rods, And Tubing

CPVC

Fluoropolymers

HIPS-Polystyrene

PFA-Fluropolymer

Polycarbonate

Polypropylene

Tygon® Tubing

Domestic Selling Policy

Contact

Pinewood Derby Cars

Square Watermelon Growing Cases

Acrylic Colored Pig Pipes

Zytel FR15
ASTM and ISO Properties
Physical	Nominal Value	Unit	Test Method
Density -Specific Gravity	1.16	sp gr 23/23°C	ASTM D792
Mold Shrink, Linear-Flow (0.126 in)	0.0090	in/in	ASTM D955
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (73 °F)	12300	psi	ASTM D638
Tensile Elongation @ Brk (73 °F)	10	%	ASTM D638
Flexural Modulus (73 °F)	500000	psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (73 °F)	0.599	ft-lb/in	ASTM D256
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness			ASTM D785
(M-Scale)	83
(R-Scale)	120
Thermal	Nominal Value	Unit	Test Method
DTUL @264psi - Unannealed	158	°F	ASTM D648
Melting Point	505	°F	DSC
Electrical	Nominal Value	Unit	Test Method
Comp Track Index	600	V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
(0.0295 in)	V-0
(0.0591 in)	V-0
(0.118 in)	V-0
Limiting Oxygen Index	32	%	ASTM D2863
UL 746	Nominal Value	Unit	Test Method
Rel Temp Indx Mech w/oImp			UL 746
(0.0295 in)	185	°F
(0.0591 in)	185	°F
(0.118 in)	185	°F
Rel Temp Indx Mech w/Imp			UL 746
(0.0295 in)	167	°F
(0.0591 in)	167	°F
(0.118 in)	167	°F
Rel Temp Indx Elect			UL 746
(0.0295 in)	266	°F
(0.0591 in)	266	°F
(0.118 in)	266	°F
Additional Properties
The value listed as Mold Shrinkage, ASTM D955, was tested in accordance with DuPont test methods. CTI, IEC 60112, 23°C: >600 V Flammability Classification, IEC 60695-11-10, 0.75mm: V-0 Flammability Classification, IEC 60695-11-10, 1.5mm: V-0 Flammability Classification, IEC 60695-11-10, 3.0mm: V-0

Tube Caps / Plugs

Self Drilling Screws

Excel Plastics, 251 Perry St. SW, Byron Center, MI 49315 Contact Excel Plastics

Uhmwpe Rods Privacy Domestic Selling Policy